0

National instruments pci gpib.PCI-GPIB Support for Different Operating Systems

 

National instruments pci gpib

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Reported In.PCI-GPIB Support for Different Operating Systems – National Instruments

 

NI is an NI instrument driver with several utilities that help in developing and debugging an application program. NI includes high-level commands that automatically handle all bus management, so you do not have to learn the programming details of the GPIB hardware product or the IEEE protocol. PCI, IEEE GPIB Instrument Control Device—The PCI‑GPIB is a plug‑and‑play IEEE interface for PCs and workstations with PCI expansion slots. The PCI‑GPIB can sustain data transfer rates of more than MB/s using the IEEE three‑wire interlocked handshake. 42 rows · GPIB Instrument Control Devices offer IEEE controllers that are compatible with ExpressCard.

 

National instruments pci gpib.PCI-GPIB Interfaces for sale | eBay

GPIB, Serial, and Ethernet products communicate between your PC and stand-alone or modular instruments. You can use the GPIB (IEEE ), Serial (RS, RS, and RS), or Ethernet interfaces to create instrument control systems. Filter by: Supported Hardware Platform PXI Computer-Based Device CompactRIO. Supported Hardware Platform. NI is an NI instrument driver with several utilities that help in developing and debugging an application program. NI includes high-level commands that automatically handle all bus management, so you do not have to learn the programming details of the GPIB hardware product or the IEEE protocol. The PCIe‑GPIB achieves maximum IEEE transfer rates. With an onboard bus master DMA controller, there is no microprocessor interruption in data transfers. The device includes a license for the NI‑ driver software, providing maximum reliability for connecting to .
 
 
related:

Issue Details

Shop by category
Microchip Technology PIC16F882: The Most Affordable General Purpose Microcontrollers in the PIC16F88X Family

With the release of a new microcontroller model, Microchip Technology has expanded the Small PIC family in the lower, most budgetary part of it. Despite its low price, the PIC16F882 model is designed for a wide range of applications, as it provides a rich set of capabilities. In addition, it gives developers a way to reduce the cost of devices by switching from more expensive models at the end of software debugging, since it is software compatible with them.

Introduced last fall, the PIC16F88X family now includes five models, which in turn are compatible with other 28/40-pin PIC microcontrollers. Among their features are dual internal oscillators; up to 14 channels of analog-to-digital conversion; improved comparator modules; reduced power consumption. All models of the PIC16F88X family have a unified set of peripheral units and several memory configuration options, which, according to the manufacturer, greatly simplifies the selection of the desired model and the transition from one model to another.

Some details of the PIC16F882:

  • 3.5 KB flash memory;
  • 128 bytes of non-volatile electrically erasable memory (EEPROM);
  • Integrated debug module;
  • 11 10-bit ADCs
  • UART / SCI (EUSART), Master Mode SPI and I2C interfaces with Address Mask option; up to 36 general purpose I / O lines.

Application examples include battery-powered devices and battery controllers; modules that intensively work with analog signals; applications for which miniaturization is critical.

PIC16F88X microcontrollers start at $ 1.27. PIC16F882 deliveries start in April. ICs PIC16F882, PIC16F883 and PIC16F886 are available in 28-pin PDIP, SOIC, SSOP and QFN packages, and models PIC16F884 and PIC16F887 are available in 40-pin PDIP type and 44-pin QFN and TQFP types.

Source: Microchip Technology

admin

Leave a Reply

Your email address will not be published. Required fields are marked *